002 trans has 8mm holes
930 CV's have
3/8 -24 fine thread bolts

Procedure:

• remove cup seal

• remove c-clip

• insert 930 to 002

• drive flange

• replace c-clip

• tap drive flange and C-clip against the wavy washer inside trans with large socket to seat C-clip

• Replace cup seal

• insert 930 CV to test fit

• Find a 930 AXLE that fits the trailing arms system and install our 3x3 needs about 19.25"

• connect to 930 stubs

• Torque the bolts to spec

  
  READY TO RIP!